Karaoke Store
66A, Jalan Mutiara 1/1,
Taman Mutiara Rini,
81300 Skudai,
Johor Bahru,
Johor, Malaysia.
+6016-6680228
Branch
Lot G22, Tesco Bukit Indah
1, Jalan Indah 15,
Taman Bukit Indah,
81200 Johor, Malaysia.

Lab Gruppen Power Amplifier FP7000

Previous 4 / 4 Next

Lab Gruppen Power Amplifier FP7000 Lab Gruppen Power Amplifier Power Amplfier


VERSATILE AND DURABLE WORKHORSE ENGINEERED TO SATISFY ALL BUT THE MOST POWER-HUNGRY NEEDS.Overview Image

TECH SPEC OVERVIEW

  • Benchmark power density – The FP 7000 delivers a total of 7000 W (2 x 3500 W @ 2 ohms) in only 2U.
  • Lab.gruppen sound quality – impeccable sonic performance standards with durability and greater efficiency
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software 
  • Patented Class TD amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency 
  • Regulated Switch Mode Power Supply (R.SMPS) – Output power remains constant even with significant drops in the mains voltage
  • Efficient cooling system - Unique, lightweight Intercoller copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters - Selectable Gain, scalable Voltage Peak Limiter (VPL), and bridge-mode operation allow custom configuration for any application
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start
  • XLR input connectors
  • Heavy-duty binding post or Speakon output connectors

TECH SPEC

Model FP 7000
General
Number of amplifier channels 2
Peak total output all channels driven 7000 W
Peak output voltage per channel 155 V
Max output current per channel 59 A peak
Max output power (all channels driven)
2 ohms 3500 W
4 ohms 2800 W
8 ohms 1450 W
16 ohms 730 W
Max output power bridged
2 ohms Not recommended 1
4 ohms 7000 W
8 ohms 5600 W
16 ohms 2900 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Input impedance 20 kOhm
Output impedance @ 100 Hz 19 mOhm
Gain, Sensitivity and Limiters
VPL, selectable per ch 155, 121, 101, 83, 70, 56, 47, 38 V
VPL, when bridged 2 310, 242, 202, 166, 140, 112, 94, 76 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 35 dB
Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Output connectors (per ch.) Neutrik speakON
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
NomadLink network On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 4 Yes
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front














 
 
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version