Share:


Lab Gruppen Power Amplifier FP14000

BUILT TO HANDLE EXTREME LOW-FREQUENCY LOADS EFFORTLESSLY...

Overview Image

TECH SPEC OVERVIEW

  • Unprecedented power density – The FP 14000 delivers a total of 14000 W (2 x 7000 W @ 2 ohms) in only 2U. 
  • Lab.gruppen sound quality – The FP 14000 is optimized for sustained performance into extreme low-frequency loads, yet it also maintains Lab.gruppen’s reputation for exceptionally smooth and transparent mid- and high-frequency response.
  • NomadLink® network ready – Monitoring and control of key functions accessible via the intuitive DeviceControl software and the robust, daisy-chained NomadLink® network, as well as by the leading third party control platforms.
  • Patented Class TD® amplifier topology – Road-proven output stage delivers Class B audio quality with Class D efficiency.
  • Regulated Switch Mode Power Supply (R.SMPS™) – Output power remains constant even with significant drops in the mains voltage.
  • Efficient cooling system – Unique, lightweight Intercooler copper cooling system dissipates more heat to allow extended peak output
  • Adjustable parameters – Selectable Gain, scalable Voltage Peak Limiter (VPL™), and bridge-mode operation allow custom configuration for any system or application.
  • XLR input and link connectors
  • Heavy-duty binding posts
  • Comprehensive protection and warning – Excessive output current, DC, high temperature, very high frequency (VHF), short circuit, open load, mains fuse protection, and soft start.


TECH SPEC

Model FP 14000
General
Number of amplifier channels 2
Peak total output all channels driven 14000 W
Peak output voltage per channel 195 V
Max output current per channel 90 A peak
Max output power (all channels driven)
2 ohms 7000 W
4 ohms 4400 W
8 ohms 2350 W
16 ohms 1200 W
Max output power bridged
2 ohms Not recommended 1
4 ohms 14000 W
8 ohms 8800 W
16 ohms 4700 W
Performance
THD 20 Hz - 20 kHz at 1 W <0.1%
THD at 1 kHz and 1 dB below clipping <0.05%
Signal to Noise Ratio >112 dBA
Channel separation (Crosstalk) at 1 kHz >70 dB
Input impedance 20 kOhm
Output impedance @ 100 Hz 19 mOhm
Gain, Sensitivity and Limiters
VPL, selectable per ch 195, 170, 140, 116, 100, 80, 66, 54 V
VPL, when bridged 2 390, 340, 280, 232, 200, 160, 132, 108 V
Voltage Peak Limiter mode (per ch.) Hard / Soft
Amplifier gain selectable (all channels) – rear-panel switches 2 23, 26, 29, 32, 35, 38, 41, 44 dB
Default gain 38 dB
Level adjustment (per channel) Front-panel potentiometer, 31 position detented from -inf to
Connectors and Buttons
Input connectors (per ch.) 3-pin XLR, electronically balanced
Output connectors (per ch.) Neutrik speakON / binding post
Output bridge mode A+B - Ch. A is signal input source. A+B, C+D - Ch.’s A and C are input source
NomadLink network On board, 2 x RJ45 connectors IN and OUT
Intelligent fans (on/off) Yes, depending on presence of output signal
Power on/off and Remote enable on/off Individual switches on front-panel
Cooling Dual fan, front to rear airflow, no filter required, temperature controlled speed
Front-panel user interface
Common NomadLink Network; Power Average Limiter (PAL)4; Power on
Per channel Signal present / High-impedance; -10 dB and -4 dB output signal;Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230 V / 115 V nominal 3 130-265 V / 65 -135 V
Minimum power-up voltage, 230 V / 115 V 171 V / 85 V
Power Average Limiter (PAL) 4 Yes
Soft-start / Inrush Current Draw Yes / max. 5 A
Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock
Dimensions
Dimensions W: 483 mm (19”), H: 88 mm (2 U), D: 396 mm (15.6”)
Weight
Weight 12 kg (26.4 lbs)
Finish
Finish Black painted steel chassis with black painted steel / aluminum front

 



 Inquiry - Lab Gruppen Power Amplifier FP14000